Kyocera KM-6030 Service Manual page 97

2FB/2FC-3
Maintenance
item No.
Adjusting exposure in eco-print mode
U080
Description
Adjusts the image density in the eco-print mode.
Purpose
To increase or decrease the image density in the eco-print mode.
Method
Press the start key. The screen for adjustment is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Setting
Exposure is toner economy mode
Increasing the setting makes the image darker; decreasing it makes the image lighter.
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting DP reading position modification operation
U087
Description
Sets the black line inspection at the time of reading the original from the DP.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select CCD at the screen for selecting an item.
2. Change the value using the cursor up/down keys.
Setting
Black line inspection
3. Press the start key. The value is set.
Setting
1. Select BLACK LINE at the screen for selecting an item.
2. Select CLEAR.
3. Press the start key. The setting is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-24
Description
Setting range
-12 to 0
Setting range
0 to 255
Default setting
-5
Default setting
200