4. Remove two screws of hinge retainer at the
rear side of the left hinge.
5. Remove the pin and screw of the left hinge
and screw of the right hinge.
* Note the graduation position of the right
hinge.
6. Slide the DP to rear and release the hooks
of the left and right hinge. Push up the DP
and remove the DP from the machine.
Pin
Screw
Screw
Hook
Hook
Figure 1-6-161-2
DP
Figure 1-6-162
2FB/2FC-4
Hinge retainer
Graduation
1-6-82-1
1-6-83