Kyocera KM-6030 Service Manual page 55

2FB/2FC
20. Insert the two nuts into the main tray.
21. Secure the main tray with two pins.
22. Install the sub tray by inserting it from above
into the hole on the finisher.
Main tray
23. Remove the screw and then remove the sig-
nal cable cover.
24. Connect the signal cable to the connector of
the machine.
1-3-20
Nuts
Pins
Figure 1-3-37
Sub tray
Signal cable cover
Figure 1-3-38
Signal cable
Figure 1-3-39
Hole