Kyocera KM-6030 Service Manual page 246

Removing the separation pulley of cassette 2
28. Remove the separation pulley unit from the
primary paper feed unit of cassette 2.
29. Remove the separation pulley from the sep-
aration pulley unit, and then clean or replace
the pulley (see page 1-6-6).
30. Refit the separation pulley unit to the pri-
mary paper feed unit of cassette 2.
31. Refit the paper feed pulley unit to the pri-
mary paper feed unit of cassette 2.
32. Close the primary paper feed unit and insert
the joint to the paper feed pulley shaft.
33. Refit three stop rings to the primary paper
feed unit.
34. Refit the deck conveying unit.
Separation pulley unit
Figure 1-6-17
2FB/2FC-2.0
Primary paper feed unit
of cassette 2
1-6-9