Kyocera KM-6030 Service Manual page 162

Section Jam code
System 04
05
06
Paper feed 10
section
11
12
13
14
15
19
20
Description
Cover open
Memory read ready time-
out
Main charger error
No paper feed from cas-
sette 1
No paper feed from cas-
sette 2
No paper feed from cas-
sette 3
No paper feed from cas-
sette 4
No paper feed from side
feeder
No paper feed from MP
tray
Misfeed in copier vertical
paper conveying section 2
Misfeed in copier vertical
paper conveying section 3
Cover is open during copying.
Secondary paper feed does not start even if 30 s elapse after
the registration switch (RSW) is turned on and primary paper
feed is complete.
An error signal is generated continuously more than 400 ms
when the main charger is turned on during printing.
Feed switch 2 (FSW2) does not turn on within 480 ms of paper
feed motor 1 (PFM1) turning on.
Timing switch 1 (TIMSW1) does not turn on within 200 ms of
the paper feed motor 2 (PFM2) turning on.
Timing switch 2 (TIMSW2) does not turn on within specified
time <330 ms (240 ms) for 80 cpm/430 ms (240 ms) for 60
cpm> of paper feed motor 3 (PFM3) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8 " size.
1/2
Timing switch 3 (TIMSW3) does not turn on within specified
time <330 ms (240 ms) for 80 cpm/430 ms (240 ms) for 60
cpm> of paper feed motor 4 (PFM4) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8 " size.
1/2
Side feeder feed switch (SFFSW) does not turn on within 2000
ms of the side feeder paper feed clutch (SFPFCL) turning on;
the clutch is then successively held off for 50 ms and turned
back on twice, but the switch again fails to turn on within 848
ms.
Feed switch 1 (FSW1) does not turn on within specified time
(500 ms for 80 cpm/643 ms for 60 cpm) of the MP feed motor
(MPFDM) turning on.
Feed switch 4 (FSW4) does not turn on within specified time
<330 ms (240 ms) for 80 cpm/430 ms (240 ms) for 60 cpm> of
timing switch 2 (TIMSW2) turning on.
Feed switch 5 (FSW5) does not turn on within specified time
<330 ms (240 ms) for 80 cpm/430 ms (240 ms) for 60 cpm> of
timing switch 3 (TIMSW3) turning on.
Feed switch 4 (FSW4) does not turn on within specified time
<500 ms (400 ms) for 80 cpm/650 ms (400 ms) for 60 cpm> of
feed switch 5 (FSW5) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8 " size.
1/2
Feed switch 3 (FSW3) does not turn on within specified time
<500 ms (400 ms) for 80 cpm/650 ms (400 ms) for 60 cpm> of
feed switch 4 (FSW4) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8 " size.
1/2
Conditions
2FB/2FC
1-5-3