Table of Contents
Advertisement
P
ROGRAMMING
With the Secondary Extension Appearances feature, you can program various buttons
on your endpoint (and on the Mini-DSS) to indicate the call activity at a different
extension (primary extension). In addition to being able to see when a call is ringing,
answered, or on hold, you can use your secondary extension button to answer a call
that is ringing at the primary extension. Your endpoint may also be programmed to
ring automatically when a given number of calls are waiting at the primary extension
(ask your system administrator).
There are two possible types of secondary extension buttons: programmable and non-
programmable. If you have a non-programmable secondary extension button, only the
system administrator can change the associated extension. If you have a programma-
ble button, you can change the extension, as described below.
NOTE:
You can only assign the extension for a secondary extension button. You can-
not create or change the secondary extension button (e.g., make it a feature button).
To display the current secondary extension button assignment(s):
With the handset in the cradle, dial
1.
Press the secondary extension button(s) you want displayed.
2.
To assign a primary extension number to a secondary extension button (if
enabled):
With the handset in the cradle, dial
1.
Press the secondary extension button and dial the desired extension number.
2.
Once programmed, you can use your secondary button as follows:
•
You can press your flashing secondary extension button to answer a call that is
ringing or holding on any
•
You can press your unlit secondary extension button to place an intercom call to
the primary extension.
NOTE:
If the secondary button is flashing (i.e., a call is ringing at the primary exten-
sion), you can press
the primary extension without answering the call. Or, you can just dial the primary
extension number.
To transfer a call back to the extension after you have answered it on your end-
point:
•
To transfer to hold: Press the secondary extension button, announce the call (if
desired), and then hang up.
•
To transfer to ring: Press
You can announce the call, if desired, before hanging up to complete the transfer.
®
Inter-Tel
Model 8560/8660 User Guide
S
E
ECONDARY
CALL
before pressing the flashing button to place an intercom call to
#
TRANSFER
B
XTENSION
UTTONS
.
3
9
6
.
3
9
7
button at the primary extension.
and then the secondary extension button.
67
Advertisement
Chapters
Table of Contents
