Table of Contents
Advertisement
11.
Gently wipe the LED head surface with a clean, lint free cloth.
12.
Finally, close the top cover and press down firmly at both sides so that the cover
latches closed.
I
MAGE DRUM REPLACEMENT
Static sensitive devices, handle with care.
The machine contains one image drum unit.
1.
Press the cover release and open the printer's top cover fully.
If the printer has been powered on, the fuser will be hot. This area
is clearly labelled. Do not touch.
2.
Holding it by its handles, lift the image drum assembly, complete with toner
cartridges, up and out of the printer.
CAUTION!
WARNING!
Maintenance > 67
Advertisement
Table of Contents
