Using Basic Features; Managing Call Activity - Polycom VVX 300 User Manual

Using Basic Features

Now that you are familiar with your phone's user interface, you are ready to perform basic phone tasks
that you can do on a daily basis. This chapter explains how to handle multiple calls at one time, how to
manipulate incoming and active calls, and how to access directories and lists so you can perform tasks
quickly and efficiently.
This chapter includes information about the following tasks:
 Calling, answering, holding, and ending calls
 Ignoring, rejecting, forwarding, and transferring calls
 Setting up conference calls
 Enabling Do Not Disturb
 Listening to voicemail
 Managing Directories, Recent Calls, and Favorites
 Customizing ringtones
 Controlling phone volume
 Using headsets
 Managing shared lines

Managing Call Activity

Your system administrator can set up your phone to have up to six lines with unique extension numbers,
or the same extension number as other lines on your network. Your phone can manage a maximum of 24
active, incoming, and held calls at a time on all registered lines. However, you can only have one active
call in progress with numerous other incoming calls or calls on hold.
You can place and answer calls using the following:
 The handset
 The speakerphone
 A headset
To alternate between the handset, headset, and speakerphone:
» During a call, pick up the handset, press
For example, if you're using the handset, you can switch to headset mode by pressing
switch to speakerphone mode by pressing
When you're in speakerphone mode,
an analog headset is connected.
Polycom, Inc.
212.631.8100
Polycom VVX 300 and 310 Business Media Phones
, or press .
.
glows green. When you're in headset mode,
sales@transbeam.com
User's Guide Version 5.0.0
glows green if
transbeam.com
, or
20
18