System Shutdown - Avaya 1408 User Manual

21.6 System Shutdown

You can shutdown the telephone system for a specified number of minutes. Note that this is not a polite shut-down, once
you have confirmed the action, any existing calls and services using the telephone system will start being disconnected.
The telephone system will then remain unavailable for the duration you specify, the default being 10 minutes. After the
shutdown duration it will take up to 5 more minutes for the telephone system to complete its restart.
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option System Shutdown.
8. Press the Select soft key or the OK button or the
9. The current default timeout (10 minutes) setting is shown and can be used by pressing Done soft key. Otherwise
enter the timeout required in hours and minutes and then press the Done soft key.
· The allowable range for the timeout is from 00:05 to 24:00. Note that the Done soft key is not displayed if
the timeout entered is not within the allowed range.
· To enter the : symbol in the timeout press either the * or # key.
· To delete the previous digit or character entered press the
10.After pressing the Done soft key, you will be asked to confirm whether you want to shutdown the telephone
system. Only proceed is you are sure. If you are not sure press the Back soft key.
11.If you press the Confirm soft key, the telephone system will switch itself to a shutdown state. This will disconnect
all current calls and services.
1408, 1416 Phone User Guide
IP Office
right arrow key or press the
arrow keys to scroll the display to the option Phone User.
arrow keys to scroll the display to the option System Admin. If the option is not
System Administration: Setting the Time Offset
right arrow key.
right arrow key.
left arrow key.
PHONE key and then press
15-601040 Issue 05a (25 October 2011)
Page 159