EC
Hydro
Midsize
12. Attach swivel to bottom of control rod and thread
on 2 in. Install the left tracking control assembly
W into the left hand control Z using pin U. Adjust
swivel X to align with pump arm Y. Install pin U
and tighten jam nut V.
13. Attach swivel to bottom of control rod and thread
1-3/4 in. Install the right hand control rod J,
the shorter of the remaining rods into the right
hand control G secure secure with cotter pins H.
Adjust swivel L to align with pump arm K. Secure
with pin H.
ASSEMBLY/SET-UP INSTRUCTIONS
7