Ransomes 933308G Maintenance & Parts Manual page 10

ASSEMBLY/SET-UP INSTRUCTIONS
14. Insert threaded end of brake rod Q through the
slot on the engine deck and attach the other end
to the brake control arm R and secure in place
with hairpin S as shown.
15. Connect swivel on threaded end of brake rod
Q to the brake arm T and secure in place with
hairpin S as shown. Adjust swivel to provide
adequate braking when the brake control arm is
engaged. See adjustment section of this manual.
16. Close bypass valves X by rotating clockwise until
fi rmly seated.
8
EC
Hydro
Midsize