Ransomes 933308G Maintenance & Parts Manual page 23

EC
Hydro
Midsize
TRACK WIDTH ADJUSTMENT
The track width originally set from the factory can be
increased an additional 3-1/4" overall by performing
the following steps.
1. Loosen wheel lug nuts on both drive tires.
2. Raise rear of unit so that drive tires are off the
ground. Support the unit with jack stands.
3. Remove wheel lug nuts and wheels. Reattach
wheels with the tires rotated so the wheel offset
is the opposite of when they were previously
installed. Install and tighten lug nuts until they
are snug
4. Lower machine off of the jack stands and torque
wheel lug nuts to 85 ft-lbs.
TIRE PRESSURE ADJUSTMENT
Tire pressures should be maintained at
14 psi (1.0 kg/cm 2 ).
ADJUSTMENTS
21