Ransomes 933308G Maintenance & Parts Manual page 14

LUBRICATION
MACHINE LUBRICATION
Every 50 Working Hours - Lubricate the following points with grease:
1) Caster wheel pivots (2 points)
2) Neutral eccentric pin (2 points)
3) Idler pivot bearings:
a) Engine to cutterdeck belt tensioner
b) Cutterdeck belt tensioner
c) Hydro drive belt tensioner
NOTE: The spindles used on these machines use a superior sealed bearing which does not require
relubrication.
12
EC
Hydro
Midsize