Ransomes 933308G Maintenance & Parts Manual page 7

EC
Hydro
Midsize
6. Route cables and wires as shown, and tie
harness to upper handles as shown.
7. After installing handles, make sure to check the
throttle and choke setting are correct.
With the throttle in the high idle position, the
holes should be aligned as shown.
8. Install (2) springs P and (2) 3/8-16 nylon
locknuts M from parts bag onto bolt F on each
side of the machine. Attach springs to bolts on
neutral return brackets N as shown.
ASSEMBLY/SET-UP INSTRUCTIONS
5