ADJUSTMENTS
TRACKING ADJUSTMENT TURNBUCKLE
The tracking adjustment turnbuckle provides tracking
control to correct for any hydraulic circuit or linkage
differences from one side to the other.
To correct tracking:
1. Loosen wing nut X.
2. Rotate the tracking adjustment turnbuckle Y to
the right to make the machine track to the right.
3. Rotate the tracking adjustment turnbuckle Y to
the left to make the machine track to the left.
4
Tighten wing nut X.
CONTROL LEVERS
The control levers are controlled by spring tension,
and require no adjustment.
HANDLE BAR HEIGHT ADJUSTMENT
To adjust handle bar height: Remove swivel B at
each pump control arm and the parking brake rod.
Remove bolts G and loosen bolts E on each side of
handlebars. Raise or lower as required. Reposition
upper handle and reinsert bolts at location G into
appropriate hole in lower handle and tighten.
Readjust control rods and swivels and reinstall.
Readjust parking brake and rod.
20
EC
Hydro
Midsize