System Tests; Test Menus - Kodak dryview 8300 User Manual

System Tests

Use the test menus to test operaton of the Kodak DryView 8300 Laser Imager.
Note
While running system tests, you cannot acquire and print images.
You can run the following tests on the imager:
1. Perform System Diagnostic Test – Runs diagnostic software to test imager
functions the same way the power-on self-test does.
2. Print SMPTE Pattern – Prints four stored test pattern images on one film.
3. Perform Keypad Test – Tests keypad and individual key function.
4. Display Software Versions – Displays versions for software programs that run
the imager.
5. Display System Configuration – Displays current system configuration values
such as image memory, contrast and density parameters for each input (user).

Test Menus

2002 March Rev. E 1340744
System Diagnostic
Test
See page 4-17
Print SMPTE
Pattern 4:1
See page 4-17
Keypad Test
See page 4-18
Display Software
Versions
See page 4-19
Display System
Configuration
See page 4-20
Troubleshooting
4-15