Using the Enhanced Utilities (2)
2.Press "4" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press
or
Mode 2 as the default setting.
Then press Yes key.
4. Press No/Clear key, back to the initial state.
7.2.5 Setting 2in1 MODE
Set the initial value of 2in1 function (see "Setting 2in1 mode"➭ P 7-14).
It is possible to set when additional memory is installed.
1.Press the Utility key 2 times then the display
appears the message "COPY SETTING".
2. Press "5" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press
or
default setting and press Yes key.
key to select Mode 1 or
key to select ON or OFF as
7-15
GHI
4
4 DENSITY (ADF)
*MODE 1
MODE 2
,
& YES
Yes
No
C
Utility
COPY SETTING?
OK=YES / or 1-6
JKL
5
5 2in1 MODE
*ON
OFF
,
& YES
Yes
x 2