Minolta Di151 Operator's Manual page 77

Basic Fax Operation (1)
When a PBX is Being Used
When dialing a number to an outside line via a PBX, it may take some time to
be connected to the Redial / Pause key)
For example: 0-06-532-3276(if access number=0)
When the transmission is completed, a buzzer
sounds and the message "TX COMPLETE" is
shown for 2 sec., indicating that the document
has been successfully transmitted to the other
party.
To obtain detailed results of a transmission, print the Activity Report. ➭P 9-11
If the Line is Busy
If the line of the receiving party is busy the Auto
Redial function is automatically activated and the
machine repeats dialing the number.
If the Transmission Fails
If the transmission fails, a buzzer sounds
intermittently for 2 sec. and the Error Indicator
lights up.
(The error code: OODA may different to yours)
The machine then automatically prints a TX / RX
Result Report.
Press the Stop key.
The document is fed out and the Error Indicator will go out, note the reason for
failure on the TX/RX Result Report and retry transmission or check the fax
number is correct.
Press the Redial/Pause
key and the 'P' appears.
! =0P065323276_
* TX COMPLETE *
TOKYO
* REDIAL WAITING *
TOKYO
* COMM. ERROR*
* REDIAL ALL FAILED *
TOKYO
3-9
Redial/
Pause
(TX=START)
1
(OODA)
Stop