Connect To Private Branch Exchange (Pbx) - Minolta Di151 Operator's Manual

First Things to Know About Your Machine

1.6 Connect to Private Branch Exchange (PBX)

When dialing an outside number via a PBX, it may take some time to be connected to
the outside line after dialing out.
In such a case, if you enter the numbers consecutively, a connection may not be
achieved after dialing (Dial Error).
To avoid such an error, enter a pause command at the beginning of the telephone
number after entering the number for accessing the outside line.
By entering a pause, you can avoid the dial error caused by the PBX system.
The number you dial to access the outside line differs for different PBX systems
How to operate
1. Enter the access number used by your PBX.
For example: 0
2. Press the Redial/Pause key after '0' for wait about
2.5 seconds when connect to the PSTN line.
3. Use the Numeric keys to input the number you want to dial.
For example: 54321
If you have entered the wrong number, press the
key. The cursor position moves back one position.
Enter the correct number again.
4. Press Start key to perform the transmitting.
#=0_
#=0P_
DEF
JKL GHI
3
5 4
#=0P54321_
#=0P54321
1-24
OPER
0
(TX=START)
Redial/
Pause
(TX=START)
ABC
2 1
(TX=START)
(TX=START)