Using the Enhanced Utilities (2)
7.2.3 Setting MANUAL DENSITY
Set initial value of manual density level.
1.Press the Utility key 2 times then the display
appears the message "COPY SETTING".
2. Press "3" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press
or
density as default setting and press Yes
key.
4. Press No/Clear key, back to the initial state.
7.2.4 Setting DENSITY(ADF)
Adjust the copy image density level when optional Automatic Document Feeder is
installed. This setting varies the gamma curve setting according to the type of originals
frequently used.
Setting
MODE 1 When the standard original (text original) is used.
MODE 2 To give better reproduction of a faint original.
1.Press the Utility key 2 times then the display
appears the message "COPY SETTING".
key to select the desired
Description
7-14
Utility
COPY SETTING?
OK=YES / or 1-6
DEF
3
3 MANUAL DENSITY
LIGHT
,
& YES
Yes
COPY SETTING?
OK=YES / or 1-6
No
C
Default
Utility
COPY SETTING?
OK=YES / or 1-6
x 2
DARK
*
x 2