IBM Infoprint Color 1354 User Reference Manual page 89

Message
63 Unformatted Disk
64 Disk Not Supported
64 Unsupported Disk
Format
80 Fuser Maintenance
81 Engine Code CRC
Failure
82 Waste Bottle Nearly
Full
82 Waste Toner Bottle
Full
82 Waste Toner Bottle
Missing
83 ITU Maintenance
84 Oiler Nearly
Exhausted
84 Replace Oiler
What this message means
The printer detects an unformatted
hard disk.
The printer detects that an
incompatible hard disk is installed.
The printer detects an unsupported
disk format.
The counter that tracks wear on the
fuser has reached its limit.
Microcode in the engine flash code
module has failed a system check.
The toner waste container is almost
full.
The toner waste container is full.
The toner waste container is missing.
The counter that tracks wear on the
image transfer unit has reached its
limit.
The web oiler is nearing the end of its
life.
The web oiler has reached its end of
life or is missing from the printer.
87
What you can do
• Press Go to clear the message and
continue printing.
• Format the disk before performing any
disk operations. To format the disk,
select Format Disk from the Utilities
Menu.
• If the error message remains, the hard
disk may be defective and require
replacing. Install a new hard disk and
format it.
See also: Format Disk
Turn the printer off and remove the disk.
See also: Removing memory and option
cards
• Press Go to clear the message.
• Format the disk.
Note: Disk operations are not allowed
until the disk is formatted.
• Press Go to continue printing.
• If print quality is unacceptable, replace
the fuser.
See also: Replacing the fuser
• Press Go to clear the message.
• Discard the code. Retransmit the
microcode data from the host computer.
• Press Go to clear the message and
continue printing.
• Replace the toner waste container.
See also: 82 Waste Toner Bottle
Replacing the toner waste container
Replace the toner waste container and
press Go to clear the message.
See also: Replacing the toner waste
container
Replace the toner waste container and
press Go to clear the message.
See also: Replacing the toner waste
container
• Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
See also: Replacing the image transfer
unit and transfer roller
• Press Go to clear the message and
continue printing.
• Replace the web oiler.
See also: 84 Replace Oiler
Replace the web oiler.
See also: 84 Oiler Nearly Exhausted
Full;