Table of Contents
Advertisement
Message
40 <color>
Invalid Refill
50 PPDS Font Error
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Serial Option <x>
Error
54 Standard Serial
Error
54 Network <x>
Software Error
54 Std Network
Software Error
54 Std Par ENA
Connection Lost
54 Par <x> ENA
Connection Lost
55 Unsupported
Option in Slot <x>
55 Unsupported Flash
in Slot <x>
What this message means
The printer has detected an
unsupported refilled cartridge.
The PPDS interpreter has
encountered a font error.
The printer detects defective flash
memory.
There is not enough free space in the
flash memory to store the data you are
trying to download.
The printer detects unformatted flash
memory.
The printer has detected a serial
interface error on a serial port.
The printer cannot establish
communications with an installed
network port.
The printer has lost the connection to
an external print server (also called an
external network adapter or ENA).
An unsupported option card is installed
in one of the ports or an unsupported
flash DIMM is installed in a memory
slot.
85
What you can do
Remove the indicated print cartridge and
install a new one.
See also:
Replacing print cartridges
• Press Go to clear the message and
continue printing.
• Press Menu to open the Job Menu and
reset the printer or cancel the print job.
Press Go to clear the message and
continue printing. You must install different
flash memory before you can download any
resources to flash.
• Press Go to clear the message and
continue printing. Downloaded fonts and
macros not previously stored in flash
memory are deleted.
• Delete fonts, macros, and other data
stored on the flash memory.
• Install flash memory with more storage
capacity.
• Press Go to clear the message and
continue printing. You must format the
flash memory before you can store any
resources on it.
• If the error message remains, the flash
memory may be defective and require
replacing.
• Make sure the serial link is set up
correctly and you are using the
appropriate cable.
• Press Go to clear the message and
continue printing. The job may not print
correctly.
• Press Menu to open the Job Menu and
reset the printer.
• Press Go to clear the message and
continue printing. The job may not print
correctly.
• Program new firmware for the network
interface by way of the parallel port.
• Press Menu to open the Job Menu and
reset the printer.
• Make sure the cable connecting the ENA
and the printer is securely attached. Turn
the printer off and then on to reset the
printer.
• Press Go to clear the message. The
printer erases any reference to the ENA
and then resets.
Turn off and unplug the printer. Remove the
unsupported option. Plug in the printer and
turn it on.
See
Removing memory and option
cards
for help.
Advertisement
Table of Contents
