PostScript Menu
Use the PostScript Menu to change printer settings that only affect jobs using the PostScript emulation
printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item
Purpose
Font Priority
To establish the font search order.
Note: Font Priority is only displayed
when a formatted flash or hard disk is
installed, is neither defective nor Read/
Write or Write protected, and Job
Buffer Size is not set to 100%.
Image
To enhance the contrast and
sharpness of low resolution bitmapped
Smoothing
images (such as images downloaded
from the World Wide Web) and smooth
their color transitions.
Note: Image Smoothing has no effect
on images that are 300 dpi or higher
resolution.
Print PS
To print a page defining the PostScript
emulation error when an error occurs.
Error
Values
Resident*
Printer searches printer memory for
the requested font before searching
flash memory or hard disk.
Flash/Disk
Printer searches the hard disk and
flash memory for the requested font
before searching printer memory.
Off*
Uses default resolution when printing
all images.
On
Enhances low resolution images, such
as graphics with a resolution of 72 dpi.
Off*
Discards the print job without printing
an error message.
On
Prints an error message before it
discards the job.
62