Canon i-SENSYS LBP5300 Series Service Manual page 144

Chapter 5
SelectableFirmware
Selectable Firmware
4) When the result of downloading is indicated, click [OK].
SelectableFirmware
Selectable Firmware
The end of work with the SST does not mean the end of work to be performed on the machine. Be sure not to turn off the machine until it indicates '00 ready'.
It takes about 1 min from when [start] is clicked to when '00 ready' is indicated.
If turning OFF the machine during the writing process, it is necessary to download the firmware again. If turning ON the machine under this condition, the machine
startup with the download mode, so perform the firmware download.
If turning OFF/ON the machine once again without downloading, the error code 'E602-0002' will be displayed and disabling redownload; thus, PCB replacement
will be required.
5) Click [EXIT].
5-18
Service Support Tool DLM0 (Ver.3.21E) Download
Select the firmware to be
download, rhen click the [Start]
button.
LBP5360
CONT
XXxxv0102
XXxxv0103
CONT
Country/Region: All
Language: Common
Version: 01.03
Service Support Tool DLM8 (Ver.3.21E) Download
Caution
Downlaod complete
Task using SST has ended.
The machine will start writing process
automatically.
"Add New Hard ware Wizard" will start
automatically; click Cancel button to close it.
Click [OK] button to return to Main Menu.
LBP5360
CONT
XXxxv0102
XXxxv0103
CONT
Country/Region: All
Language: Common
Version: 01.03
Control
Click the button of task to be
executed.
Download Firmware
Start
Cancel
Return to Main Menu
F-5-17
O K
O K
Cancel
Return to Main Menu
F-5-18
Information
Initial
Connect via USB
Download
Complete
formation
Initial
Close USB Port
Download
Complete