The new version will not be effective unless the power has been turned off and then back on.
5.5 Service Mode
5.5.1 Outline
5.5.1.1 Outline
i-SENSYS LBP5300
The machine is equipped with service mode to enable the service person to check its condition. On a PC, enter the appropriate ID from the keyboard to add a special
menu to the Printer Status Window screen.
Starting Service Mode
1. Turn on the power so that the Printer Driver screen appears.
2. On the Drive screen, bring up the Status window [1].
3. Enter the appropriate password (*28*) from the keyboard.
4. See that service mode [2] has appeared on the Option menu of the Status Window screen.