Chapter 5
Number field
A7-00
A fault exits in the software program of the video controller.
5.3.6 D7-XX_ERROR
i-SENSYS LBP5360
Number field
D7-00, 01
A fault has occurred in the firmware of the PCL translator.
5.3.7 D8-XX_ERROR
/ i-SENSYS LBP5360
Number field
D8-00 TO 0C
A fault has occurred in the firmware of the LIPS LX (BLD) translator.
5.4 Version Up
5.4.1 Outline
5.4.1.1 Overview of Upgrading Work
/ i-SENSYS LBP5360
The machine's system software may be upgraded using a PC to which the Service Support Tool (SST) has been installed.
5.4.1.2 Construction of Firmware
/ i-SENSYS LBP5360
The following shows the composition of the machine's firmware:
Firmware
cont
5-10
Description
Description
Description
Function
Controls overall machine operation.
T-5-7
1) Turn on the power once again.
2) If step 1 fails, replace the controller board.
T-5-8
1) Turn on the power.
2) If step 1 fails, replace the controller board.
T-5-9
1) Turn on the power.
2) If step 1 fails, replace the controller board.
T-5-10
Location
Video controller board
Corrective action
Corrective action
Corrective action
Remarks
Soldered to flash ROM (IC2)
0014-7335
0014-7336
0014-7538
0014-7539