Control Panel - Canon i-SENSYS LBP5300 Series Service Manual

[1] Alarm Indicator (Orange)
On: Service call is occurring.
Blinking: An error is occurring, disabling printing.
[2] Paper Jam Indicator (Orange)
Blinking: A paper jam is occurring, disabling printing.
[3] Ready Indicator (Green)
On: The printer is in the sleep mode and ready to print.
Blinking: The printer is busy performing some kind of processing or operation, such as printing, warming up, calibrating, or pausing a job.
[4] Toner Indicator (Orange)
On: Toner cartridge replacement is required.
Blinking: Cannot print because toner cartridge replacement is required or any toner cartridge is not installed properly.
Indicator of the color that requires toner cartridge replacement comes on or blinks. "K", "Y", "C", and "M" indicate black, yellow, cyan, and magenta
respectively.
[5] Load Paper Indicator (Orange)
On: There is no paper in any paper source.
Blinking: No paper or paper of an inappropriate size is loaded.
[6] Cancel Job Key/ Cancel Job Indicator (Orange)
Pressing this key cancels the job in which an error is occurring and that in a printing process. The indicator comes on while pressing the key. The indicator blinks
while a job is in the cancellation process.

1.5.2 Control Panel

i-SENSYS LBP5360
The control panel consists of a status indication segment, control keys, and LEDs. The following shows the individual LEDs and the functions of the keys:
[1] [Cancel Job] Key
On offline:
Cancels the job when the Job indicator is on or blinking. Does not function when the Job indicator is off.
On online:
Cancels the job when the Job indicator is on or blinking. Does not function when the Job indicator is off.
[2] Ready Indicator (Green)
On:
The printer is ready to print. (If the printer has entered Power Save Mode when it is online, only the Ready indicator (green) is on, and all the other indicators
are off.)
Blinking:
The printer is performing a self-diagnostic test. The printer is in a warm-up state.
Off:
The printer cannot print.
[3] Message Indicator (Orange)
On:
The printer cannot print because a problem has occurred in the printer. (If the printer has entered Power Save Mode when it is offline, only the Message indicator
(orange) is on, and all the other indicators are off.)
Off:
The printer is in a normal state.
[4] HDD Indicator (Green)
On:
Data is being read from the hard disk or being written to the hard disk.
Off:
Data is not being read from the hard disk or being written to the hard disk.
[5] Job Indicator (Green)
On:
The printer is receiving print data, or any print data remains in the printer memory.
Blinking:
The printer is processing print data.
Off:
There is no print data in the printer memory.
[6] [Job] Key
[1] [2]
[1] [2] [3] [4] [5]
[14] [13] [12]
[3] [4] [5]
F-1-8
[6] [7]
[11] [10] [9]
F-1-9
[6]
[8]
Chapter 1
0015-1827
1-7