Using The Security Bar; Selecting An Input Source - BenQ i500 User Manual

Securing the projector

Using the security bar

The projector has to be installed in a safe place to prevent theft. It has a security lock bar located at the bottom of the projector which you can use to
secure the projector via a variety of purchasable self-locking cables.

Selecting an input source

The projector can be connected to multiple equipment at the same time. However, it only displays one full screen at a time. When starting up, the
projector automatically searches for the available signals.
If you want the projector to always automatically search for signals:
• Press the MENU button on your remote control.
• Under the OSD menu, go to the Settings menu, and then enable Auto Source Search (see
Security Bar
Auto Source Search on page
37
58).