Installing internal drives
46
IBM® xSeries 350: User's Reference
11. Route the SCSI cable to the ServeRAID adapter using the following illustration as
a guide.
Attention: When you route the SCSI cable, observe the following:
•
Do not block the ventilated space in front of the fan assembly.
•
Do not place the SCSI cable fold on top of the fan assembly.
•
Do not route the SCSI cable over the memory board assembly.
CPU
DASD
Memory
NMI
PCI
Bus
SP Bus
A B C
Event Log
Power
Supply
Non Red
1 2 3
Over Spec
Temp
Fan
12. Connect the SCSI cable to an internal channel connector on the ServeRAID
adapter.
Note: See to the Using IBM ServeRAID book on the Documentation CD for
information on ServeRAID adapters and controllers.
If you add different types of drives, your system can read multiple types of media and
store more data. Several types of drives are available, such as:
•
Diskette
•
Hard disk
•
CD-ROM
•
DVD-ROM
•
Tape
Note: The server supports external tape drives; however, the server does not support
internal tape drives.
ServeRAID adapter