Replacing The Battery - IBM eserver xSeries 350 User Reference Manual

pnt0-31 I/O address is not necessary for the PCI device.
Explanation: The I/O address specified is not required.
Action: Remove the assigned I/O address specified for the Ethernet controller

Replacing the battery

126
IBM® xSeries 350: User's Reference
Table 23. UNIX LLI driver messages for the Ethernet controller.
IBM has designed this product with your safety in mind. The lithium battery must be
handled correctly to avoid possible danger. If you replace the battery, you must
adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
If you replace the original lithium battery with a heavy-metal battery or a battery with
heavy-metal components, be aware of the following environmental consideration.
Batteries and accumulators that contain heavy metals must not be disposed of with
normal domestic waste. They will be taken back free of charge by the manufacturer,
distributor, or representative, to be recycled or disposed of in a proper manner.
To order replacement batteries, call 1-800-772-2227 within the United States, and 1-
800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call
your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure your server and reset the
system date and time.
To replace the battery:
1. Read the information in "Before you begin" on page 39.
2. Follow any special handling and installation instructions supplied with the
battery.
3. Turn off the server and all attached devices, and disconnect all power cords and
external cables (see "Safety" on page v); then, remove the top cover.