IBM eserver xSeries 350 User Reference Manual page 153

11
A
Press in on the safety latch
server into the rack until the release latches
snap shut. Then, insert the M6 screws
through the release-latch-bracket assembly.
Note: Inserting the M6 screws
unless you are moving the rack or the rack is
in a vibration-prone area.
Refer to your server documentation to complete the installation.
B
C
and slide the
A
B
C
is optional,
B
12
A
If you need to access the rear of the server to
complete the installation, rotate the lever
the vertical position and pull the arm away
from the server. Otherwise, the lever must be
in the horizontal position inside the rack to
prevent the cables from touching the rear
door of the rack.
Chapter 7. Rack installation instructions
to
A
141