Changing Feature Options - AT&T 1855 User Manual

ATT-1855CIB-d05.qxp
1
SET UP
Press and hold for 1 second
to enter feature menu.
2
SET UP
Press until desired feature
is heard (see list at right).
3
SKIP/REPEAT
Press until desired selec-
tion is heard.
4
SET UP
Press to set selection and
move to next menu option.
Or
PLAY/STOP
Press to set selection and
exit menu.
What is Priority Call Code?
If a caller enters your Priority Call
Code while your announcement is
playing, you'll be alerted with a
special tone so you can answer
the call.
The code is pre-set to 999. See
steps at right to change it.
4/8/2005 5:39 PM Page 21
Answering System Operation

Changing feature options

When the answering system is on, you can customize
how the system operates. Press and hold
begin, then press repeatedly to hear each feature. Press
SKIP/REPEAT
Feature options
System announces:
"Selected announcement is..."
Options: A / Announce Only
"Number of rings is..."
Options: 2-7 / 24 / 46 (default 4)
"Message alert is..."
Options: On / Off
"Remote access code is..."
Options: 500-999 / (default 500)
"Priority call code is..."
Options: 500-999 / (default 999)
"Announcement monitor is..."
Options: On / Off
"Number announce is..."
Options: On / Off
"Store number is..."
Options: On / Off
"Accept blocked calls is..."
Options: On / Off
"Call screening is..."
Options: On / Off
"Selected ring is..."
Options: Ring style 1-4
21
to change the setting of any feature.
(Default settings underlined)
Feature description:
A: Callers can leave messages.
Announce Only: Callers cannot leave
messages (see page 19).
Choose number of rings before the system
answers a call (2 to 7). There are two toll-
saver options: 2/4 (2 rings if new messages,
4 otherwise) and 4/6 (4 rings if new
messages, 6 otherwise).
When on, the telephone beeps every 15
seconds when you have new messages.
Follow prompts to enter a 3-digit number
(must be between 500 and 999).
A special tone alerts you when callers
enter this code (must be 500-999).
When on, you will hear your outgoing
announcement as callers hear it.
When on, you will hear Caller ID number
spoken when a call is received.
When on, you will hear caller's phone
number spoken before message playback.
When on, the telephone will accept calls
from callers with blocked Caller ID.
When on, you can hear callers as they
leave messages.
Press SKIP/REPEAT to hear and select
one of four different ringing styles.
to
SET UP