Table of Contents
Advertisement
This option allows the user to select the maximum size of the Diagnostic Event Log.
The default size for the Diagnostic Event Log is 100 KB. The size can be increased
in 100 KB increments to a maximum of 1 MB.
Display Previous Diagnostic Results
Note: This service aid is not available when you load the diagnostics from a source
This service aid allows a service representative to display results from a previous
diagnostic session. When the Display Previous Diagnostic Results option is selected,
the user can view up to 25 no trouble found (NTF) and service request number (SRN)
results.
This service aid displays Diagnostic Event Log information, which can be displayed in
either short or long version. The information is displayed in reverse chronological order.
This information is not from the AIX operating system error log. This information is
stored in the /var/adm/ras directory.
You can run the command from the AIX command line by typing:
/usr/lpp/diagnostics/bin/diagrpt [[-o] | [-smmddyy mmddyy] | [-a] | [-r]]
Flag
-o
-s mmddyy
-a
-r
Display Resource Attributes
This task displays the Customized Device Attributes associated with a selected
resource. This task is similar to running the lsattr -E -l resource command.
Display Service Hints
This service aid reads and displays the information in the CEREADME file from the
diagnostics media. This file contains information that is not contained in the publications
for this version of the diagnostics. The file also contains information about using this
particular version of diagnostics.
Use the arrow keys to scroll through the information in the file.
116
User's Guide
other than a hard disk drive or a network.
Description
Displays the last diagnostic results file stored in the
/etc/lpp/diagnostics/data directory
Displays all diagnostic result files logged since the date specified
Displays the long version of the Diagnostic Event Log
Displays the short version of the Diagnostic Event Log
Advertisement
Table of Contents
