IBM Intellistation POWER 9112 265 User Manual page 167

Step 7
This step loads Online Diagnostics in service mode. If you are unable to load the
diagnostics, go to "Step 8".
1. Turn on the power.
2. When the keyboard indicator (icon or text) appears, press F6 on the directly
attached keyboard, or 6 on the ASCII terminal keyboard, to indicate that diagnostics
are to be loaded.
3. Enter any requested passwords.
4. Follow any instructions to select a console.
Did the Diagnostics Operating Instructions display without any obvious display
problem?
NO
YES
Step 8
Starting at the top of the following table, find your symptom and follow the instructions
given in the Action column.
Symptom
Display problem
All other symptoms
Step 9
Find your type of console display in the following table. Then follow the instructions
given in the Action column.
Console Display
Display Device
ASCII terminal
Go to "Step 8".
Go to "Step 10" on page 148.
Chapter 8. Hardware Problem Determination
Action
Go to "Step 9".
Go to "Problem Determination When Unable to
Load Diagnostics" on page 152
Action
Go to the display documentation for problem
determination.
Go to the problem-determination documentation
for this type of terminal.
147