Spin Delay - IBM Intellistation POWER 9112 265 User Manual

Spin Delay

Select this icon to change the spin-up delay for SCSI hard disk drives attached to your system.
Spin-up delay values can be entered manually or you can use a default setting. All values are
measured in seconds. The default is two seconds. After you have entered the new spin-up delay
values, use the arrow keys to highlight the Save icon and press Enter.
<Hard Disk Spinup Delay>
Current Spin Up Value - 2
Enter New Value (>1)
(SEC)
Default
Save Exit
69
Chapter 4. Using System Management Services