IBM Intellistation POWER 9112 265 User Manual page 103

Selecting the Adapter Parameters option allows you to view an adapter's hardware
address, as well as configure network adapters that require setup. A screen similar to
the following displays.
Device
1. ethernet
2. token-ring
3. ethernet Integrated
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Selecting an adapter on this screen displays configuration menus for that adapter:
10/100 Ethernet TP PCI Adapter
1. Data Rate (Currently Auto)
2. Full Duplex (Currently Yes)
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Slot Hardware Address
3 0004AC5E08D2
5 0020357A0530
0004ACE4020B
Chapter 4. Using System Management Services
X = eXit System Management Services
X = eXit System Management Services
83