Konica Minolta bizhub 362 Installation Manual page 12

14.Touch "Detail Setting."
15.Touch "Date & Time Setting."
16.Enter the date, time, and the time zone using the
ten-key pad.
17.Touch "Job Start."
18.Touch "END."
19.Touch "Basic."
20.Touch "Center ID."
21.Enter the Center ID (five digits) and touch
"Enter."
22.Touch "Center Phone No."
23.Enter the Center Phone No. using the ten-key
pad as well as P, T, W, and – keys on the screen,
and touch "Enter."
A11UIXC042MA
24.Touch "Fwd."
25.Touch "Device ID."
26.Enter the Device ID (nine digits) and touch
"Enter."
27.Touch "Device Phone No."
28.Enter the Device Phone No. using the ten-key
pad as well as P, T, W, and – keys on the screen,
and touch "Enter."
A11UIXC044MA
29.Touch "END."
* Follow the procedure 30 through 34 only for the
PHS communication.
30.Touch "Software Switch Setting."
A11UIXC042MA
31.Touch "Bit Selection."
32.Select the bit number for DIPSW using the arrow
keys, and change the number as shown below
using the 10-key pad.
10000001 → 01100001
33.Touch "Enter" displayed in the lower right corner
of the screen.
34.Touch "Enter" displayed in the upper right corner
of the screen.
35.Touch "Basic."
E-12
A11UIXC045MA
A11UIXC046MA