DRY (DEHUMIDIFYING)
1.
Press the On / Off button (34).
2.
Press the mode button (31) until the DRY mode indicator is illuminated.
3.
Use temperature button (37) to select the desired temperature (16°C to 32°C)
4.
Press the On / Off button (34)
FAN
1.
Press the On / Off button (34).
2.
Press the mode button (31) until the FAN mode indicator is illuminated.
3.
Use fan speed buttons (39) to select the desired fan speed (LOW, MED or HIGH).
4.
Press the On / Off button (34)
The remote control may operate other electronic devices if pointed towards them. Make sure to
point the remote control towards the signal receiver of the air conditioner.
NOTE
For proper operation, use a soft cloth to clean the signal transmitter LED and the receiver window.
ADVANCED FUNCTIONS
Through the use of the remote control there are also three advanced functional modes available, these are TIMER
(On / Off timer operation), SLEEP (automatic comfort operation) and SWING (louvre controlled air movement).
Before the TIMER or SLEEP functions can be used the clock must be set.
SETTING THE CLOCK
1.
Press and hold the CLOCK button (33) for five seconds (the clock digits will begin to flash)
2.
Use the timer / clock adjustment buttons to set the current time.
3.
When the desired time is reached press the CLOCK button (33) to lock in the time.
Holding down a button for approximately five seconds will increase the speed at which the time
changes.
NOTE
If no buttons are pressed for 10 seconds, clock setting will be cancelled and no change will be
made.
ADVANCED FUNCTIONS REMOTE CONTROL
ON TIMER
1.
With the appliance OFF, press the TIMER button (35), the Clock
symbol and a flashing ON timer icon will be displayed.
2.
Use the timer / clock adjustment buttons to select the desired
start time.
3.
Press the TIMER button (35) to lock in the time.
4.
Set the desired operational modes and temperature.
5.
Press the TIMER button (35) to begin timer based operation,
when the set ON time is reached the appliance will turn ON.
If no buttons are pressed for 10 seconds, clock setting will be cancelled and no change will be
made.
NOTE
Rinnai
22
C
ON
OFF
12:38
A
P
9
OPERATION
22
22
22
22
22
C
C
ON
OFF
ON
OFF
19:30
19:30
A
A
P
P
Portable Room AC OIM
C
ON
OFF
12:38
A
P
C
ON
OFF
12:38
A
P
C
ON
OFF
12:38
A
P