Fig. 3-10. Report Of A Dynamic Ip Assigned By Dhcp To A Rapid Eye Unit - Honeywell rapid eye System Administrator Manual

Setting up a Connection to a Rapid Eye Unit
DNS registration
The DNS registration of DHCP leases is made with the DNS specified by the DHCP server, network
card properties. Contact your organization's Network administrator to obtain the proper primary
DNS entry for your local client if the name is not resolved.
Leased IP address
To see the IP address that DHCP leased to the unit, use View to run a
then click the System tab. See figure 3–10.
Fig. 3–10. Report of a Dynamic IP Assigned by DHCP to a Rapid Eye Unit.
Note
To Configure DNS in DHCP, Using Microsoft's Server2000 (or 2003)
1. Using Microsoft Windows, use the DHCP MMC.
2. Open the local DHCP Server Properties window. See figure 3–11.
3. On the DNS (Dynamic Network Service) tab, select Always update DNS.
4. Select Enable updates for DNS clients that do not support dynamic update.
5. Restart the DHCP service.
34
Changing a unit's Use DHCP or Site Name while operating a unit "locks out"
remote operators using the network connection to the unit, until a new working
connection definition is made.
Maintenance Session, and