Correcting The Clock; Securing A Site; Rebooting A Unit - Honeywell rapid eye System Administrator Manual

Multi-media
Hide thumbs Also See for rapid eye:
Table of Contents

Advertisement

Unit Configuration: Basics

Correcting the Clock

Whole hours: time reference
Check the "Time Reference" setting. If the clock of a unit in another time zone shows a time that is
off by whole hours, the clock could be set to the correct time, but using an optional display (GMT,
operator's time zone, unit's time zone). See the Remote View Operator Guide: Selecting a Time
Reference.
Whole hours: time zone
Check the "Time Zone" setting. If the clock of a unit in another time zone shows a time that is off by
whole hours, the clock could be set to the correct time, but set to an incorrect time zone. See
Unit's Time Zone and
Setting the clock to the correct time
A short span of incorrect time. If a unit's clock shows the wrong time (more than +/– a few
seconds), for a short while (a few seconds, a few minutes, up to an hour, or so):
Set the clock correctly; either automatically or manually.
A follow-up may be needed: clearing storage
A long span of incorrect time. If the clock remains set to an incorrect time (more than +/– a few
seconds) for a considerable length of time (many hours, days or weeks) it can become
inconvenient and confusing for an operator who needs to play through that recorded video. For
such an error:
Set the clock correctly; either automatically or manually.
Consider

Securing a Site

Securing the Multi system
After
Making a Site Operational
Eye site by adding:
A system password. Use Admin to set a system password to protect your sites from
unauthorized accounts. See
- and -
A password for the "Administrator" account. To help prevent: (a) an uncontrolled configuration
of Multi-Media units; (b) the accidental clearing of a unit's storage or (c) unwanted removal of
the system password. See
Then update security, as explained in

Rebooting a Unit

1.
Start a
Maintenance Session
message appears.
2.
Click Reboot.
58
Clock, p. 54.
Clearing
Storage. See p. 131.
(see p. 52), Honeywell recommends that you secure your Rapid
System
Administrator
Updating Security on a Multi-Media
for the Rapid Eye site. Please wait until the "System operational"
Password, on p. 172.
Password, on p.
183
Unit, on p. 133.

Advertisement

Table of Contents
loading

Table of Contents