Fig. 5–8.
Optimization options
The list of options changes depending on:
The use of NTSC or PAL
The number of cameras connected to the unit. Optimization cannot be used if the cameras are
not connected contiguously. See
Making Optimized Resolution and Frame Rate Settings
In the Automatic DSP Performance Maximization window (see fig. 5–8), double-click an "automatic
option".
Manual display of Maximization window
To display the Automatic DSP Performance Maximization window, click the "Configure Automatic
Optimizations" command, after right-clicking on the Recording tab. See fig. 5–9.
Fig. 5–9.
Document 800-02325 Rev A
07/08
The Automatic DSP Performance Maximization Window.
Optimizing Recorded
The Configure Automatic Optimizations Command.
System Administrator Guide
Video, p. 72.
73