Unit Configuration: Basics
Fig. 4–5.
6.
Click Next. The message that opens describes the exact version that you are upgrading to. Click
Next to start the upgrade.
7.
The unit will reboot automatically once the upgrade has completed.
Maintenance Reference
Ending Maintenance
To end a
Other actions can also close sessions:
Click
Click Disconnect on the Actions menu
Close View.
Using Apply
The Apply button is used after changes have been made to the: IP address and other network
settings (including DHCP), motion mask, or response rules. If the Apply button is active and you
click another tab, the button remains active.
60
The System Tab: Upgrading Remote View Software
Maintenance
Session, close the Maintenance window.