Bluetooth; Transmission Security; About Sd Cards; Precautions For Use - Tascam Mixcast 4 Owner's Manual

Bluetooth

®
This unit has a built-in Bluetooth audio module. This allows input of
sound played on Bluetooth devices—computers and portable audio
devices that support Bluetooth (A2DP)—as well as output of sound from
this unit to other Bluetooth devices.
ATTENTION
The Bluetooth function of this unit is not guaranteed to enable con-
nection or operation with all Bluetooth devices.

Transmission security

This unit supports security functions during Bluetooth transmission in
accordance with the Bluetooth standard specifications, but it does not
guarantee the privacy of such transmissions. TEAC CORPORATION will
bear no responsibility should an information leak occur during transmis-
sion by Bluetooth.

About SD cards

Precautions for use

SD cards are delicate media.
In order to avoid damaging SD cards, please take the following precau-
tions when handling them.
p Do not leave them in extremely hot or cold places.
p Do not leave them in extremely humid places.
p Do not let them get wet.
p Do not put things on top of them or twist them.
p Do not hit them.
p Do not remove or insert them during recording, playback, data trans-
mission or other access.
p When transporting them, put them into cases, for example.

SD card write protection

This unit writes track information to the media in order to improve op-
eration performance. Since, for example, setting information cannot be
written to SD cards that are write-protected, settings will not be retained
when the unit is restarted and performance will be otherwise affected.

Note about formatting

SD cards formatted by this unit are optimized to improve performance
during recording. Use this unit to format the SD cards to be used with
it. Errors might occur when recording with this unit using an SD card
formatted by a computer or other device.

Beware of condensation

Condensation could occur if the unit is moved from a cold place to a
warm place, it is used immediately after a cold room has been heated or
it is otherwise exposed to a sudden temperature change. If this occurs,
let the unit sit for one to two hours before turning it on.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with chemical
cleaning cloths, thinner, alcohol or other chemical agents.
Doing so could damage the surface or cause discoloration.

Precautions for placement and use

p The operating temperature range of this unit is 0–40 °C.
p Do not install this unit in the following types of locations. Doing so
could degrade the sound quality and/or cause malfunctions.
Places with significant vibrations
Next to a window or in another location exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
Places exposed directly to rain or other water
p To enable good heat dissipation, do not place anything on top of the
unit.
p Do not place this unit on top of a power amplifier or other device
that generates heat.

About TASCAM customer support service

TASCAM products are supported and warrantied only in their country/
region of purchase.
To receive support after purchase, on the TASCAM Distributors list page
of the TEAC Global Site (https://teac-global.com/), search for the local
company or representative for the region where you purchased the
product and contact that organization.
When making inquiries, the address (URL) of the shop or web shop
where it was purchased and the purchase date are required. Moreover,
the warranty card and proof of purchase might also be necessary.
35
TASCAM Mixcast 4