Messages Regarding Printing Or Adjustment - Canon iPF830 Series Basic Manual

iPF830 Series

Messages regarding printing or adjustment

Messages regarding printing or adjustment
Cannot print as specified. .............................................................................................................................. 133
Cannot adjust printhead. ............................................................................................................................... 135
Borderless printng not possible. Paper stretched or shrank. .......................................................................... 133
Before borderless printing, move the blue platen switch. ............................................................................... 133
Borderless printng not possible. .................................................................................................................... 129
Blue platen switch is dirty. ............................................................................................................................. 133
Move the blue platen switch No.xx to the right. (xx represents a number) ...................................................... 133
Check printed document. .............................................................................................................................. 134
Cannot print as specified.
Cannot print as specified.
"Lift the release lever and replace paper with A4/LTR (vertical) or larger."
Cause
The loaded paper is too small.
"Lift the release lever and replace roll with 10 in. wide or larger roll."
Cause
The loaded paper is too small.
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
The loaded roll has expanded or contracted due to environ-
mental conditions, making it wider or narrower than the
supported width for borderless printing.
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
The blue Switch on the platen was set to the side oppo-
site ● when a borderless print job was received.
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause
The blue Switch on the platen is dirty.
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
The printer has detected that the blue Switch on the platen nee-
ded in maintenance during printing is set away from the ● mark.
Basic Guide
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Cause
Cause
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Cause
Press the OK button to stop printing.
Use each type of paper only where the recommended environmental
conditions are met. For details on environmental conditions for vari-
ous paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Corrective Action
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
P.47
➔
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.")
Cannot print as specified.
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
133