Paper Cutting Failed; End Of Paper Feed - Canon iPF830 Series Basic Manual

Paper cutting failed.

•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
Important
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
Paper cutting failed.
Paper cutting failed.
Cause
There are sheets left on
the Ejection Guide.
There is a foreign object
by the Output Tray, ob-
structing the Cutter Unit.
You are not using the
printer under the recom-
mended environmental
conditions for the paper.
You are using paper that
is not compatible with au-
tomatic cutting.
The Cutter Unit stops in
the middle of cutting.
In other cases, the Cutter
Unit may be damaged.

End of paper feed.

End of paper feed.
128
Although an attempt was made to advance the paper manually, it reached
the limit position that can be advanced.
Cause
1.
Lift the Release Lever and remove the paper.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
1.
Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are met. Note
that various environmental conditions are recommended for various types of paper. For details on the
recommended environmental conditions for paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Specify Manual as the cutting method and cut the roll manually.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
If the Carriage is out, move the Carriage out of the way, away from the paper.
If the Cutter is out, move the Cutter to the right side (away from the paper) and remove the jammed
paper.
(See "Clearing Jammed Roll Paper.")
If the paper cannot be cut using the Cutter Unit, specify Manual as the roll cutting method and cut the
roll manually.
(See "Specifying the Cutting Method for Rolls.")
Contact your Canon dealer for assistance.
Cause
Corrective Action
(See "Loading Rolls in the Print-
er.") P.15
➔
(See "Loading Sheets in the Print-
er.")
P.21
➔
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Attaching the Roll Holder to
Rolls.")
P.12
➔
Corrective Action
User's Guide
➔
User's Guide
➔
User's Guide
➔
P.94
➔
User's Guide
➔
Corrective Action
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
iPF830 Series
User's Guide
➔
Basic Guide