The Roll Is Empty; Lift The Release Lever And Replace The Roll; Sheet Removed - Canon iPF830 Series Basic Manual

The roll is empty.

The roll is empty.
The roll is empty.
Cause
The tailing edge of
the paper was detec-
ted because cut
sheets were loaded in
the roll paper Paper
Feed Slot.

"Lift the release lever and replace the roll."

The roll is empty.
There is remaining roll paper, but because it could not be ad-
vanced, it could not be detected.

Sheet removed.

Sheet removed.
Cause
A sheet has come out of
the printer during printing.
126
Follow these steps to install the roll paper.
1.
Press the OK button and remove the paper.
2.
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
4.
If no barcode was printed on the roll, specify the paper length.
(See "Specifying the Paper Length.")
5.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
Cause
1.
Lift the Release Lever and remove the paper.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Corrective Action
P.12
➔
P.15
➔
User's Guide
➔
User's Guide
➔
Corrective Action
Follow these steps to replace the used roll with a new roll of the
same type and size.
1.
Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
4.
If no barcode was printed on the roll, specify the paper length.
(See "Specifying the Paper Length.")
5.
If "Not finished printing. Finish printing remaining jobs?" is
shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error
occurred.
The unused portion of the roll is heavy, and this is placing a bur-
den on the printer. It may be helpful to change the printing mode,
which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings
of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for
Printing.")
User's Guide
➔
Corrective Action
iPF830 Series
P.18
➔
User's Guide
➔
P.12
➔
P.15
➔
User's Guide
➔
User's Guide
➔
Basic Guide