Canon iPF830 Series Basic Manual page 62

Menu Structure
First Level Second Level
*1:Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2:Available if Adj. Priority is Automatic or Print Quality.
*3:Available if Adj. Priority is Automatic or Print Length.
*4:Available only if Use Nesting is On.
*5:Not displayed if IPv4 Mode is Manual.
*6:Not displayed if Auto Detect is On.
*7:Follows the setting in Date Format.
*8:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
Viewing and configuration is possible for administrators, and only viewing for other users.
*9:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
Viewing and configuration is possible for administrators only.
*10:Not displayed if IPv6 Support is Off.
*11:Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12:Displayed only when the Media Take-up Unit is attached.
*13:Available if: (a) Use Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the
loaded roll.
*14:Available when Use Take-up Reel is Enable.
*15:Displayed as the menu during printing while printing is in progress.
*16:Not displayed in the regular menu.
62
Third Level
Use Situa- Tot.Print Area | Duty Counter
tion
Fourth Level Fifth Level Sixth Level Seventh Level
iPF830 Series
Eighth Level
Basic Guide