Preparing to Transfer the Printer ...................................................................................................................... 69

Reinstalling the Printer ..................................................................................................................................... 75

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.

Refer to the Setup Guide for details on packing the printer and installing it after transfer.

•

Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage

the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.

Important

•

Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer

(that is, when you execute the printer menu item to prepare for transfer).

Note

•

Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as described in the

following table. Prepare the Maintenance Cartridge in advance.

•

Always follow the instructions of the service representative when transferring the printer under Level 3 conditions.

Transport and

Storage In

Level

Low Temper-

ature Envi-

ronments

Yes

*1:This is the number of new Maintenance Cartridges required when you execute the Prep.MovePrinter

menu. The number varies depending on the amount remaining in the Maintenance Cartridge being used.

*2:If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the

Maintenance Cartridge needs to be replaced.

Remove paper

Remove the paper.

•

Rolls (See "Removing the Roll from the Printer.")

•

Sheets (See "Removing Sheets.")

Basic Guide

Permitted Angle of Inclination

Lengthwise: 0–30º

Rotation: 0–10º

All directions: 0–30º

Lengthwise: 0–90º

Rotation: 0–30º

P.23

➔

Required

Amount of Ink to

Maintenance

Dispose of

Cartridg-

es( *1 )

0( *2 )

Approx. 700

1 or 2

ml (20.3 fl oz)

Approx. 700

1 or 2

ml (20.3 fl oz)

P.18

➔

Preparing to Transfer the Printer

Usage Examples

Moving Within a Room

and Storage In Room

Temperature Environ-

ments

Transport By Vehicle

Move by temporarily

standing vertically

Table of Contents

Show Quick Links

Hide quick links:

Chapters

Table of Contents

Printer Relocation; Preparing To Transfer The Printer - Canon iPF830 Series Basic Manual