Canon iPF830 Series Basic Manual page 72

Preparing to Transfer the Printer
5
Push down the release lever (a) as shown as you
gently return all ink tank lock levers to the original po-
sition.
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
Important
7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the power cord and interface cable, as well as the Media Take-up Unit cable.
Important
72
•
Do not remove the Maintenance Cartridge except when the message for replacing it is displayed.
If you remove the Maintenance Cartridge while ink is being drawn out, the ink may leak out.
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
iPF830 Series
a
Basic Guide