Canon iPF830 Series Basic Manual page 16

Loading Rolls in the Printer
1
Press the Load button.
2
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.
•
Note
•
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the white
gear faces the side of the Roll Holder Slot with a
white gear, load the Roll Holder shaft (a) into the
grooves (b) on both ends of the Roll Holder Slot.
16
Caution
If any roll paper that will not be used or cut sheet has been fed, a message is shown requesting you to
remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.
If roll paper is loaded but cut sheet is selected as the paper source, a message asking you whether or not
to change paper is displayed.
Press ▲ or ▼ to select Load, and then press the OK button. Remove the paper and proceed to the next
step.
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
b a
iPF830 Series
a b
Basic Guide